基于数字信道化的极微弱信号载波频率引导模块设计与实现

针对深空探测中常规点数的FFT无法对极微弱信号进行精确的频率引导,而超长点数的FFT无法用现有器件实现,提出一种基于数字信道化的并行FFT频率引导方法.接收信号先经过数字信道化处理,均匀划分为若干窄带信号,然后分别对各子带信号进行FFT运算,最后通过对各子带有效谱线的联合检测完成载波频率的精确估计.在等效219点FFT的频率引导模块FPGA实现中,通过FFT模块的复用节约了硬件资源开销.测试结果表明:在8MHz采样率下该模块的测频精度小于10Hz.     

基于正态分布曲线的分段式变步长LMS算法

针对传统最小均方误差(Least Mean Square, LMS)自适应滤波算法由于步长固定,在解决稳态误差与收敛性之间的关系时,始终处于矛盾状态的问题,在对传统的固定步长LMS自适应滤波算法分析的基础上,根据变步长LMS自适应滤波算法的步长调整原则,通过构造步长因子与误差信号的非线性函数,提出了一种基于正态分布曲线的分段式变步长LMS自适应滤波算法,并分析了参数取值对算法性能的影响。针对实际信号处理过程中参考信号难以选取的问题,提出了一种基于分裂阵的参考信号选取方法。理论和海试数据分析结果表明:该算法的收敛速度和稳态误差明显优于固定步长的LMS自适应滤波算法和基于Sigmoid函数的变步长LMS自适应滤波算法。     

Effect of microstructure on short pulse duration shock initiation of TATB and initial response mechanism

Micro-TATB particles with different sizes and 3D nanoporous TATB architectures with different specific surface areas were prepared through recrystallization to study short pulse duration shock initiation properties by electric gun technology. For micro-TATB, the initiation threshold significantly decreases with TATB average size ranging from 79.7 μm to 0.5 μm. For 3D nanoporous TATB architecture, the initiation threshold decreases and then increases with specific surface areas increased from 9.6 m²/g to 36.2 m²/g. The lowest initiation thresholds are obtained for the micro-TATB with average sizes of 1.3 μm and 0.5 μm, and 3D nanoporous TATB architecture with specific surface area of 22.4 m²/g. The shock initiation thresholds of micro-TATB and 3D nanoporous TATB architectures show significantly decreases with the porosity increased. The decomposition reaction and thermal conductivity properties were further investigated to understand the initial response mechanism. High porosity provides more collapse sites to generate high temperature for formation of hot spots. The low thermal conductivity and decomposition temperature could enhance the formation and ignition of the hot spots, and initial decomposition reaction of TATB. The effect of the decomposition temperature is higher than that of the thermal conductivity on the shock initiation properties. The enhanced decomposition reaction could promote energy release and transfer process from the ignition to the combustion. This work offers a new insight to understand the effects of microstructure on the shock initiation properties and the initial response mechanism of TATB.     

利用曲线拟合方法分析暂态振荡信号

提出了一种利用曲线拟含定量分析暂态振荡信号的方法.该方法给出的暂态振荡信号模型能够反映振荡的幅度和频率随时间变化的规律.提出了利用曲线拟合方法确定该摸型的具体参数的步骤:首先利用三次样条插值求出信号的上包络曲线,对其采用指数衰减信号模型来进行拟合以描述信号振荡幅度的变化参数;然后得到信号频率变化部分的正弦形式,利用 Hilbert 变换提取出正弦部分的相位,并采用幂指数信号模型进行拟合以描述信号振荡频率的变化参数.与以往分析暂态振荡信号的方法相比,该方法可对信号进行定量分析.仿真和试验结果表明,采用曲线拟合方法确定模型参数,实现过程简单,均方根误差小;对实际信号的分析则表明所提出的模型能够真实地反映出实际暂态振荡信号的变化规律.     

地铁火灾应急预案的制定

介绍地铁火灾发生时的几个主要的特点以及其巨大的危害性,引出了地铁火灾应急预案制定模式的重要性。通过对已有的资料进行研究、分析,同时结合实际,对地铁火灾应急预案制定时所包含的主要内容进行了科学的完善,得出了一个完整的预案制定模式。     

共址调频和调幅系统干扰机理及干扰抑制需求分析

以调幅和调频电台为研究对象,对共平台接收电台前端低噪声放大器的非线性进行精确建模,分别对调幅电台和调频电台的干扰抑制需求进行解析,并通过数值仿真对解析模型进行验证。结果表明:所提解析模型较现有模型更为准确;当有用信号功率、噪声功率和干扰功率相同时,调幅通信系统的干扰抑制需求高于调频通信系统。     

Responses of HFR-LWC beams under close-range blast loadings accompanying membrane action

The load-carrying capacities and failure patterns of reinforced concrete components can be significantly changed by membrane effects. However, limited work has been carried out to investigate the blast resistance of Hybrid Fiber Reinforced Lightweight Aggregate Concrete (HFR-LWC) members accompanying membrane action. This paper presents a theoretical approach to quantitatively depicting the membrane behavior and its contribution on the behavior of HFR-LWC beams under close-range blast loadings, and the suitability of the proposed model is validated by a series of field tests. An improved Single-Degree-of-Freedom (SDOF) model was employed to describe the dynamic responses of beam-like members under blast loadings accompanying membrane action, where the mass-load coefficient is determined according to the nonuniformly distributed load induced by close-range explosion, and the membrane action is characterized by an in-plane (longitudinal) force and a resisting moment. The elasto-plastic and recovery responses of HFR-LWC beams under the combined action of blast load and membrane force were analyzed by the promoted model. A specially built end-constrain clamp was developed to provide membrane action for the beam member when they are subjected to blast load simultaneously. It is demonstrated that the analytical displacement-time histories are in good agreement with experimental results before peak deflections and that the improved SDOF model is an acceptable tool for predicting the behavior of HFR-LWC beams under blast loadings accompanying membrane action.     

基于椭圆曲线群上的零知识证明

通过研究椭圆曲线群,给出基于其上的2个零知识证明方案,这2个方案均使得甲方向乙方宣称自己拥有某种信息,并通过互动证明使其确信具有该信息,但同时还未泄漏该信息。     

高频雷达多波束最优天线方向图综合

在高频雷达中 ,多个部分重叠的波束被用来形成对预定空域的覆盖 ,而射频干扰和期望信号的空间结构之间的差异以及接收天线阵列的空间多样性则被用来抑制干扰以提高高频雷达的整体工作性能。然而如何在实时地形成多波束的同时有效地抑制射频干扰仍然是高频雷达一个急待解决的问题。基于最优天线方向图综合方法 ,通过主瓣形状保持和干扰抑制之间的合理折衷进一步提出了多波束形成算法。仿真结果表明该算法可以快速、灵活地形成多个波束来覆盖预定的空域 ,同时最大限度地抑制射频干扰 ,从而极大地提高了高频雷达的工作性能